Imron Waterborne Polyurethane Co-Polymer

Du Pont
Duromar
Gulf Coast Paint
Insl-x
Parker Coatings
PPG
Rust-Oleum

DuPont Imron Waterborne Polyurethane Co-Polymer coatings include primers, satin-gloss DTM (Direct-to-Metal), high-gloss topcoats, a high-gloss clear topcoat and a flat clear topcoat . . . and may also be combined with other DuPont Industrial Coatings products such as DuPont Imron polyurethane enamels and Corlar epoxies where even higher performance is required.

• Fast dry - 30 minute recoat, 2-hour hard dry.
• May be baked for super-fast hard dry.
• Dries in high humidity.
• One component - no activation, no induction time.
• Apply wiht brush, roller or spray.
• Reduction and clean up with water.
• Low VOC (1.2 to 1.8 lbs/gal), no HAPS, no isocyanates.
• Minimize environmental impact and reduce cost for permitting, abatement, waste and respirator protection.